Bitumen Handling Equipment - Concrete Slipform PaversBitumen Handling Equipment - Concrete Slipform Pavers

You're in: Home Page > Concrete Slipform pavers > Canal construction > MCP7000-4 - MCP7500-4

MCP7000-4 - MCP7500-4

MODEL MACHINE MCP7000-4

Maximum paving width in full section operation: 6,40 metres
Maximum height of the canal in slope paving : 4,00 metres


Maximum paving width in full section operation: 6,40 metres
Maximum height of the canal in slope paving : 4,00 metres

 

TECHNICAL SPECIFICATIONS

 

Engine   
 - DEUTZ liquid cooled diesel model TCD2013L064V 
Power rating 220 KW ( 299 HP ) at 2000 RPM. 
Fuel consumption 37,5 Kg/h at 80% of the rated power
Tanks capacity

- fuel tank: 300 litres capacity 
- hydraulic oil tank: 720 litres capacity

Control system for steering and levelling

 - the machine have manual and automatic control system. When in  automatic  mode the electronic over hydraulic assembly controls the grade, cross slope,  forward and reserve steering
Frame and extensions - rectangular tube, steel grade S355J2H
Hydraulic system

- one open loop twin body vane pump EATON
- two variable displacement piston pump for load sensing system EATON
- one open loop pressure compensated pump EATON
- over sized oil cooling system suitable for tropical climate with fun hydraulically powered 
Hydraulic oil filtration  
 - 20 micron absolute HYDAC filter on return line
- 10 micron absolute pressure HYDAC filter on servo-valves line
- 90 micron set of filters on suction lines
Vibratory system fourteen hydraulic vibrator circuits with individual variable speed control. The speed is continuously adjustable from 0 to 10000 R.P.M. by suitable  hydraulic oil flow regulators. The automatic on-off control for the vibrators is synchronised with the machine  forward movement.
Fourteen hydraulic stinger type vibrators
Crawler tracks   

- four hydraulically powered, gear-driven. Each of them steering and individually eight adjustable. Gear unit reduction rate i= 97,2.

- Dimensions: 2.115 x 537 x 747 mm. ( L x W x H )

Pad width: 400 mm.

Ground pressure: approximate 1,5 Kg/cm2 with weight evenly distributed 
Concrete feeding - Hydraulically driven, variable speed  concrete charging conveyor. The rubber belt width is 600 mm. The rubber belt speed is continuously adjustable from 0 to 90 m/min.
Spreader auger(s) - reversible 330 mm. diameter. Hydraulic drive 
Water system - spressurised  tank, 500 litres capacity. The air compressor has capacity of  300 cc. Max pressure set at 8 bars.
Machine weights - ranging from 26 to 34 ton.s depending from canal size

 

MODEL MACHINE MCP 7500-4


Maximum paving width in full section operation: 6,80 metres

Maximum height of the canal in slope paving : 4,50 metres

 

DATI TECNICI


TECHNICAL SPECIFICATIONS

 

Engine   
 - DEUTZ liquid cooled diesel model TCD2013L064V
Power rating 220 KW ( 299 HP ) at 2000 RPM.
Fuel consumption 37,5 Kg/h at 80% of the rated power
Tanks capacity

- fuel tank: 300 litres capacity
- hydraulic oil tank: 720 litres capacity

Control system for steering and levelling

 - the machine have manual and automatic control system. When in  automatic  mode the electronic over hydraulic assembly controls the grade, cross slope,  forward and reserve steering
Frame and extensions - rectangular tube, steel grade S355J2H 
Hydraulic system

- one open loop twin body vane pump EATON
- two variable displacement piston pump for load sensing system EATON
- one open loop pressure compensated pump EATON
- over sized oil cooling system suitable for tropical climate with fun hydraulically powered
Hydraulic oil filtration   
 - 20 micron absolute HYDAC filter on return line
- 10 micron absolute pressure HYDAC filter on servo-valves line
- 90 micron set of filters on suction lines
Vibratory system sixteen hydraulic vibrator circuits with individual variable speed control. The speed is continuously adjustable from 0 to 10000 R.P.M. by suitable  hydraulic oil flow regulators. The automatic on-off control for the vibrators is synchronised with the machine  forward movement.
Sixteen hydraulic stinger type vibrators
Crawler tracks   

- four hydraulically powered, gear-driven. Each of them steering and individually eight adjustable. Gear unit reduction rate i= 97,2.

-Dimensions: 2.115 x 537 x 747 mm. ( L x W x H ).Pad width: 400 mm.

Ground pressure: approximate 1,6 Kg/cm2 with weight evenly distributed
Concrete feeding - Hydraulically driven, variable speed  concrete charging conveyor. The rubber belt width is 600 mm. The rubber belt speed is continuously adjustable from 0 to 90 m/min.
Spreader auger(s) - reversible 330 mm. diameter. Hydraulic drive
Water system - pressurised  tank, 500 litres capacity. The air compressor has capacity of  300 cc. Max pressure set at 8 bars.
Machine weights - ranging from 28 to 36 ton.s depending from canal size

Corporate domicile: B.go Ronchini, 4-43121 Parma - Social Capital € 1.000.000.00 i.v.-Registered in the Companies Register of Parma, Vat registration No. and Tax code No.: 01831820343-R.E.A 181548 - IEC: PR 014268
Head office and factory Via Bologna, 12 - 43036 Fidenza (Parma) Italy - Ph.: 0039 0524202811-Fax: 0039 0524 530205
Internet: www.massenza.it E-mail:massenza@massenza.it - Privacy