Bitumen Handling Equipment - Concrete Slipform PaversBitumen Handling Equipment - Concrete Slipform Pavers

MP2000-3

 

 

FOURTH LEG ASSEMBLY WITH FLAT SECTIONAL MOLD AND MOLD FOR CANAL

 

 

TECHNICAL SPECIFICATIONS

 

Engine  
- DEUTZ liquid cooled diesel model BF4M1013FC
Power rating 100 KW ( 136 HP ) at 2000 RPM.  
Fuel consumption 18 Kg/h at 80% of the rated power
Tanks capacity

- fuel tank: 200 litres capacity
- hydraulic oil tank: 600 litres capacity

Control system for steering and levelling

- the machine have manual and automatic control system. When in  automatic  mode the electronic over hydraulic assembly controls the grade, cross slope,  forward and reserve steering
Frame and extensions - rectangular tube, steel grade S275J2H
Hydraulic system - one open loop single vane pump EATON
- one variable displacement piston pump for load sensing system EATON
- one open loop pressure compensated pump EATON
- over sized oil cooling system suitable for tropical climate
Hydraulic oil filtration 
- 20 micron absolute HYDAC filter on return line  
- 10 micron absolute pressure HYDAC filter on servo-valves line
- 90 micron set of filters on suction lines
Vibratory system - six hydraulic vibrator circuits with individual variable speed control. The speed is continuously adjustable from 0 to 10000 R.P.M. by suitable  hydraulic oil flow regulators. The automatic on-off control for the vibrators is synchronised with the machine  forward movement.
Four hydraulic stinger type vibrators
Crawler tracks   
- three hydraulically powered, gear-driven. Each of them steering and individually eight adjustable. Gear unit reduction rate i= 53.
- Dimensions: 1.553 x 463 x 535 mm. ( L x W x H )  
Pad width: 250 mm.
Ground pressure: approximate 1,8 Kg/cm2 with weight evenly distributed 
Concrete feeding - Hydraulically driven, variable speed  concrete charging conveyor. The rubber belt width is 500 mm. The rubber belt speed is continuously adjustable from 0 to 90 m/min.
Water system - pressurised  tank, 400 litres capacity. The air compressor has capacity of  200 cc. Max pressure set at 8 bars.
Machine weights - ranging from 10 to 12 ton.s depending from mold type

 

OPTIONAL EQUIPMENTS

 

- DEUTZ liquid cooled diesel model BF4M1013FC
Power rating 125 KW (170HP) at 2000 RPM.
Fuel consumption 21,7 Kg/h at 80% of the rated power

- additional hydraulic vibrator circuits
- additional hydraulic vibrator
- fine grade trimmer assembly
- package to pave flat slabs or canals, including:
# Two additional hydraulic vibrator circuits with individual variable speed controls
# Four additional hydraulic vibrators
# DEUTZ liquid cooled diesel model BF4M1013FC. Power rating 125 KW ( 170 HP) at 2000 RPM.
# Steering, levelling, powered fourth leg assy. Complete with crawle track and additional frame, electronic control
# Suitable mold

Corporate domicile: B.go Ronchini, 4-43121 Parma - Social Capital € 1.000.000.00 i.v.-Registered in the Companies Register of Parma, Vat registration No. and Tax code No.: 01831820343-R.E.A 181548 - IEC: PR 014268
Head office and factory Via Bologna, 12 - 43036 Fidenza (Parma) Italy - Ph.: 0039 0524202811-Fax: 0039 0524 530205
Internet: www.massenza.it E-mail:massenza@massenza.it - Privacy